Professional Heavy Equipment Cleaning
That Keeps Your Fleet Running
Our commercial-grade pressure washing removes built-up grease, mud, oil, and road grime from trucks, heavy machinery, and fleet vehicles. Maintain DOT compliance, prevent corrosion, and keep your equipment looking professional.
Why Your Heavy Equipment Needs Professional Cleaning
Heavy trucks, construction equipment, and fleet vehicles accumulate layers of grease, hydraulic fluid, road salt, mud, and diesel soot during everyday operations. This buildup is not just an appearance issue. It creates real problems that affect your bottom line and your ability to stay on the road.
Caked-on grime traps moisture against metal surfaces, accelerating rust and corrosion on frames, fuel tanks, and undercarriages. Grease buildup around engines and exhaust components creates fire hazards. And when DOT inspectors show up, dirty equipment raises red flags and invites closer scrutiny.
- Grease and oil buildup creates fire hazards around engines
- Trapped moisture accelerates rust and structural corrosion
- Dirty equipment draws increased DOT inspection attention
- Neglected grime hides developing mechanical problems
Commercial-Grade Cleaning for Commercial-Grade Equipment
Divine Shine uses high-powered hot water pressure washing combined with industrial degreasers specifically formulated for heavy equipment. Hot water breaks down petroleum-based grime that cold water simply cannot touch, while our commercial-grade equipment delivers the pressure needed to blast away caked-on mud and road buildup.
We adjust our approach based on what we are cleaning. Engine compartments get careful degreasing with targeted spray patterns. Frames and undercarriages receive high-pressure treatment to remove road salt and packed debris. Cabs and body panels are cleaned at pressures that remove grime without damaging paint or decals.
- Hot water pressure washing dissolves grease and oil on contact
- Industrial degreasers break down petroleum-based buildup
- Adjustable pressure for different surfaces and components
- Environmentally responsible wastewater containment
Heavy Equipment We Service
From single trucks to entire fleets, we handle every type of heavy equipment and commercial vehicle.
Semi Trucks & Tractors
Complete cab-to-chassis cleaning for over-the-road trucks, day cabs, and sleeper units. We clean engines, frames, fuel tanks, and body panels.
Dump Trucks & Mixers
Heavy-duty cleaning for dump trucks, concrete mixers, and vocational vehicles that accumulate extreme buildup from job sites.
Construction Equipment
Excavators, loaders, dozers, and skid steers cleaned to remove mud, hydraulic fluid, and job site debris that causes premature wear.
Fleet Vehicles
Volume pricing for fleet operators who need regular cleaning of delivery trucks, service vehicles, and utility equipment.
Tankers & Trailers
Exterior cleaning of tanker trucks, flatbed trailers, dry vans, and specialty trailers. We remove road film, salt deposits, and chemical staining.
Why Regular Equipment Cleaning Pays for Itself
Professional equipment cleaning is not an expense. It is an investment that protects your assets and keeps your operation running smoothly.
Prevents Costly Corrosion
Removing salt, moisture, and chemical buildup from frames, tanks, and undercarriages prevents the rust that leads to expensive structural repairs and premature equipment replacement.
Supports DOT Compliance
Clean equipment demonstrates professionalism and proper maintenance practices. Inspectors are less likely to flag a well-maintained truck for further scrutiny during roadside checks.
Reduces Fire Risk
Grease and oil accumulation around engines, exhaust manifolds, and turbochargers creates serious fire hazards. Regular degreasing eliminates this risk before it becomes a problem.
Reveals Hidden Issues
A clean piece of equipment makes it easy to spot developing problems like fluid leaks, cracked welds, worn hoses, and loose fittings that hide under layers of grime.
Our Equipment Cleaning Process
Every job follows a systematic process designed to deliver thorough results while protecting your equipment.
Assessment & Prep
We evaluate the equipment condition, identify problem areas with heavy buildup, and protect sensitive components like air intakes, electrical connections, and exhaust openings.
Pre-Treat & Degrease
Industrial degreaser is applied to engine compartments, frames, fuel tanks, and any areas with heavy grease or oil accumulation. The solution breaks down buildup before we wash.
Hot Water Pressure Wash
Using commercial-grade hot water pressure washers, we systematically clean every surface. Pressure and temperature are adjusted based on the area being cleaned.
Detail & Inspection
We detail remaining problem spots, clean cab interiors if requested, and perform a final walk-around to ensure every surface meets our standards before the equipment goes back into service.
Heavy Equipment Cleaning Results
See the difference professional cleaning makes on commercial trucks and heavy equipment.
Heavy Equipment Cleaning FAQ
Answers to the questions fleet operators and equipment owners ask most about professional cleaning.
We clean all types of commercial and industrial equipment including semi trucks, dump trucks, concrete mixers, excavators, loaders, dozers, skid steers, tanker trucks, flatbed trailers, and fleet vehicles of all sizes. If it has an engine and gets dirty on the job, we can clean it.
Yes, we bring everything we need directly to your location. Our mobile setup includes hot water pressure washers, industrial degreasers, and wastewater containment equipment. Whether your equipment is at a construction site, trucking yard, or maintenance facility, we come to you so your equipment stays productive.
Most fleet operators benefit from quarterly cleaning, though the ideal frequency depends on your operating conditions. Equipment working in muddy, dusty, or salt-heavy environments may need monthly cleaning. Trucks running long-haul routes typically do well with cleaning every 3 to 4 months. We can recommend a schedule based on your specific operation.
No. We adjust pressure, temperature, and spray patterns based on what we are cleaning. Body panels and decals get lower pressure to protect finishes, while frames and undercarriages receive higher pressure for heavy buildup. We protect sensitive electrical connections, air intakes, and other vulnerable components before we begin washing.
Absolutely. We offer volume discounts for fleet operators and can set up regular maintenance schedules at reduced rates. Whether you have 5 trucks or 50, we will work with you to create a cleaning program that fits your budget and keeps your equipment in top condition year-round. Contact us for a custom fleet quote.
Ready for Cleaner, Better-Maintained Equipment?
Get a free, no-obligation quote for professional heavy equipment cleaning. We serve commercial and industrial clients across Kentucky, Indiana, Tennessee & Illinois.